1, will be installed easy pull cover can sterilization basket in the sterilization pot, close the door of the sterilization pot or cover, and check its seal.

2, turn off the water valve and drain valve, full exhaust valve and drain valve. Check that all instruments, regulator and control device.

3, open the steam valve that high pressure steam quickly into the pot, quickly and fully discharge all the air pot, pot at the same time.

4, after fully exhaust, open the drain valve, discharge the condensed water pot. After condensate discharge, turn off the drain valve, then turn off the exhaust valve, the drain valve is still open, to adjust the pressure in the pot.

5, by adjusting the inlet valve and drain valve to maintain a constant temperature in the pot, until the end of the sterilization.

6, constant temperature sterilization until a predetermined time after sterilization, turn off the inlet valve, sterilization.

Dongguan SUNO easy open lid packing co., LTD. Is located in dongguan city, guangdong province, near guangzhou, shenzhen and other coastal cities, the transportation is convenient, is a specialized production enterprise of various kinds of iron and aluminium easy pull cover. Company main products has three series: drink easy pull cover, aluminum safety edge easy pull cover and tinplate easy pull cover, at the same time, suitable for all kinds of cans, aluminium cans, composite cans and PET cans. Consultation and ordering hotline: 0769-28686423/13266285888