Whether it is two or three cans cans, caps or lids are needed back then EOE appearance and specifications of size and the physical and chemical defects which do? The following real promise from Dongguan City Packing Co., Ltd. - specialized in producing all kinds of drinks easy-open lid, aluminum and tinplate EOE EOE manufacturer to provide you a brief introduction, hope that helps.

EOE appearance of defects: 1, riveting rivet cracking and leakage, groove cracking and leakage, cover surface cracking and leakage, cover edge defect, cover edge creases severe deformation, holidays, broken plastic, cover the surface leakage paint, no pull ring, pull ring fails, pull the ring burr rivet holes too large.

2, rivets slightly oval, internal and external coating penetration scratch, pull ring loose, coating irregular. Glue bubbles, glue excess glue, glue spilled glue.

3, internal and external non-penetrating scratch coating, printing color, cover edges slightly deformed.

EOE Size and physical and chemical defects: 1, aluminum and paint failure, rivet diameter, thickness deviation exceeds the allowable range, groove residues deviation beyond the permitted range, pull ring rivet hole deviation exceeds the allowable range, the deviation exceeds the width of the side stay the allowable range.

2, roll edge foreign economic, cover side opening, crochet height, buried depth, inlay ring height, shoulder bottom size, start breaking force, opening force, full force, compressive strength deviation exceeds the allowable range.

3, sealants dry weight of the positive deviation beyond the permitted range, the film thickness of the positive deviation exceeds the allowable range, the outer coating

Thickness deviation beyond the permitted range, 2 inches cover several deviations beyond the permitted range.