Industry News
Your current location:Home >> News >> Industry News
Common types of lids and production process

( 1 ) roll cover volumes cover against the former Soviet Union in the 1950s introduced jars and design. Seal better , but difficult to open , is now eliminated.
( 2 ) claw twist caps twist cap is a metal claw vacuum cover , lid , or simply re- cover rotating 1/ 4 turn to , convenient and practical , it can be opened without tools , easy to use. Diameter of 27 ~ 110mm.
( 3 ) to pry open the cover to pry open the cover is a metal vacuum cover for glass jars , jar or bottle tank cover. Metal cover rubber gasket inside rounded edges closely , but when the rubber ring seal stuck closure pressure .
( 4 ) casing pressure casing pressure twist caps twist caps (PT cap ) is a metal vacuum cover. Now widely used in baby food , meat , vegetables , beans, soups am also apply.
( 5 ) pressed heavy weight pressing capping capping casing pressure molding process and twist caps similar, but this cover six sets of claws like twist caps are horizontal pressure , but on the edge of the lid inward and with a certain angle of vertical lines . Deep pressing cover weight (DSR) , in use, the plastic pad and consistent sealing surface Guankou lid Once in place, the tension of the metal claw holding lids coming . When you open the lid to the surrounding pulled twenty-three , or use special hook to open the lid is in the periphery of the cover two or more points to open up the lift . DSR facilitate closure and sealing properties with effective weight .
   Suno EOE is a professional real promise for you to create the most secure EOE packaging business, production and research and development as a whole. The main products include three series : Beverages EOE , aluminum and tinplate EOE EOE safe side . Applies to all kinds of tin cans , aluminum cans , composite cans and PET cans. For more product information, welcome to join the company Micro Signal Suncanlid
 

Common types of lids and production process